free bootstrap theme

VAL-MATIC

Mobirise

Air Release Clean Water Valves

วาล์วไล่อากาศสำหรับน้ำดี

Product Overview

ทำหน้าที่ปล่อย / ไล่ อากาศออกจากเส้นท่อ

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C512 requirements
UL/FM Approved for fire pump service
Download Specifications.
Download brochure.

Mobirise

Air Release Wastewater Valves

วาล์วไล่อากาศสำหรับน้ำเสีย

Product Overview

ทำหน้าที่ปล่อย / ไล่ อากาศออกจากเส้นท่อ
Download Specifications.
Download brochure.

Mobirise

Air/Vacuum Clean Water Valves

Air/Vacuum หรือเรียกว่า “Large Orifice” สำหรับน้ำดี

Product Overview

วาล์วทำหน้าที่ไล่อากาศขนาดใหญ่ ระหว่างเปิดปั๊ม
และดูดอากาศขณะปั๊มหยุดทำงานกระทันกัน
หรือในช่วงระบบขัดข้อง

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C512 requirements
Download Specifications.
Download brochure.

Mobirise

Air/Vacuum Wastewater Valves

Air/Vacuum หรือเรียกว่า “Large Orifice” สำหรับน้ำเสีย

Product Overview

วาล์วทำหน้าที่ไล่อากาศขนาดใหญ่ ระหว่างเปิดปั๊ม
และดูดอากาศขณะปั๊มหยุดทำงานกระทันกัน
หรือในช่วงระบบขัดข้อง

Certifications

Meets AWWA C512 requirements
Download Specifications.
Download brochure.

Mobirise

Combination Clean Water Valves

วาล์วไล่และดูดอากาศ สำหรับน้ำดี

Product Overview

ทำหน้าที่ทั้งไล่และดูดอากาศ ทำงานเสมือนทั้ง Air Release
Valve และ Air Vacuum ในตัวเดียวกัน

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C512 requirements
Download Specifications.
Download brochure.

Mobirise

Combination Wastewater Valves

Combination Wastewater Valves

Product Overview

วาล์วไล่และดูดอากาศ สำหรับน้ำเสีย
ทำหน้าที่ทั้งไล่และดูดอากาศ ทำงานเสมือนทั้ง Air Release
Valve และ Air Vacuum ในตัวเดียวกัน

Certifications

Meets AWWA C512 requirements
Download Specifications.
Download brochure.

Mobirise

Surge-Suppression Air Valves

วาล์วไล่และดูดอากาศ พร้อมอุปกรณ์กันกระแทก

Product Overview

ป้องกันไม่ให้เกิด Secondary Surge
ป้องกันไม่ให้อากาศถูกดูดเข้าเส้นท่อ
ช่วงที่เกิด column ของน้ำแยก ( column separation )

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C512 requirements
Download Specifications.
Download brochure.

Mobirise

Vacuum Breaker Air Valves

For critical applications were vacuum protection is a must or where column separation is predicated, a vacuum breaker is used. The Vacuum Breaker is mounted at critical pipeline high points, penstocks, or tanks and allows for rapid inflow of atmospheric air to reduce vacuum conditions in piping systems.

Product Overview

Available in sizes 1/2" - 42"
Available in sizes 3" - 42" with Optional Air Release Valve
Cushions surges related to column separation
Opens in response to a 0.25 psi vacuum
Manufactured under a certified ISO 9001 quality system
Automated Sizing Program

Features

Full flow areas provide maximum vacuum protection for pipelines and tanks
Resilient seals provide drop tight seating
Connections for optional air release valve - to vent entrained air
Available with optional inflow preventer
Available with optional screened hood

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Download Specifications. 100VB | 1800VB
Download brochure.

Mobirise

Vacuum Priming Air Valves

The purpose of a Vacuum Priming Valve is to automatically allow air to be drawn out of the pumping system until the pump fills with water. Then, when the water reaches the priming valve, the float rises and closes the priming valve to prevent fluid from flowing to the vacuum priming system. The priming valve will continue to release air while the pump is running.

Product Overview

Available with 2" inlet
Allows the extraction of air from the pump housing and suction piping
Float rises and closes the priming valve to prevent fluid from flowing into the vacuum priming system
Continues to release air while the pump is running
Manufactured under a certified ISO 9001 quality system
Automated Sizing Program

Features

Specifically designed to prevent fluid leakage
Flow sensitive float
Stainless steel 316 internal trim and float
Available with optional water level control switch
Compatible with any vacuum priming system
Download Specifications.
Download brochure.

Mobirise

Well Service Air Valves

Well Service Air Valves are a member of the Air/Vacuum family and are used with vertical pumps. Well Service Valves are specifically designed to vent the air from the pump column during pump start-up in a controlled manner before the check valve opens to reduce pressure surges that result from the accelerating water column.

Product Overview

Available in sizes 1/2"-3" equipped with Dual Port Throttling Device
4" and larger equipped with Regulated-Exhaust Device mounted on the inlet
Regulates the exhaust of air on pump start-up
Admits air to protect pump and mechanical seals
Protects against air-related surges on pump start-up
Manufactured under a certified ISO 9001 quality system
Automated Sizing Program

Features

Unconditionally guaranteed 316 stainless steel floats
Inlets and outlets are equal to full nominal pipe area
Dual Port Throttling Device
Adjustable discharge outlet provides regulated air exhaust
Allows air to enter the system on pump shut down through an unrestricted independent vacuum port
Regulated-Exhaust Device
Restrictor disc provides regulated exhaust to limit pump column surges
Ability to adjust air exhaust for greater surge suppression
Provides full vacuum flow port

Certifications

NSF/ANSI 61 Certified for Drinking Water
Fully complies with AWWA C512
UL Listed for fire pump service - 2" and 3"
Download Specifications. 100ST | 102ST
Download brochure.

Mobirise

Cam-Centric® Plug Valves

The Cam-Centric® Plug Valve is the solution for systems where slurries, grit or solids are present. The eccentric plug valve is a ¼ turn valve allowing cost effective, low torque actuation for pump control, shut-off and throttling service.

Product Overview

Available in Sizes 1/2" - 60"
Advanced Technology - Pop™ Shims, Grit Guard™, Eccentric Action
Rectangular Port - available in standard or 100% port
Available in Threaded, Flanged, Mechanical Joint and 3-Way
Horizontal or Vertical Installation
Direct Nut, Worm Gear, Cylinder and Electric Actuated
Manufactured under a certified ISO 9001 quality system

Features

Plug - heavy-duty fully rubber encapsulated
Welded nickel seat - robotically welded 1/8in thick
Grit-Guard™ shaft seals - prevents bearing wear and shaft seizing
V-type packing - self adjusting and replaceable while under pressure
Stainless steel radial upper and lower bearings - permanently lubricated for extended life
Upper and lower thrust bearings - to assure plug centering
Packing overload protection (Pop™) Shims - ease of adjustment, extends packing life
Full access cover - allows inline maintenance

Certifications

NSF/ANSI 372 Certified Lead-Free
Meets AWWA C517 for resilient-seated cast-iron eccentric plug valves
Certified per AWWA C517 proof of design and flow tested
Download Specifications. 5800R-TL | 5800R | 5600F/5700F | 5500R
Download brochure. 100% Port Flyer100% Port BrochurePlug Valve BrochureZinc-Rich Coating System

Mobirise

Dual Disc® Check Valves

The Dual Disc® Check Valve with its compact wafer design and low cost have made it a popular choice when space and price are major factors in valve selection. The compact design features non-slam spring-assisted closing.

Product Overview

Wafer Style available in sizes 2"- 66"
Grooved End Style available in sizes 2”- 12”
ANSI Class 125 and ISO PN 10 and PN 16 connections for Wafer
IPS connections for Grooved End
Available for Air Service - *Contact Factory*
Cycle tested 50,000 cycles to assure long, trouble free life
Manufactured under a certified ISO 9001 quality system

Features

Lift and Pivot Action - reduces seat wear, prolongs seat life
Stabilization Spheres - prevent vibration and wear
Disc Seal Overlap - provides positive seal, prevents seat distortions
Disc Stabilization - prevents disc flutter
Flow Sensitive Closure - spring assisted closure minimizes the potential for water hammer
Pressure Sensitive Vulcanized Seats - provide tight closure at both low and high pressures
Body Alignment Fins - provide precise alignment in ANSI 125 and ISO PN10 and PN16 installations

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C518 requirements
UL Approved 2 1/2" to 12"
FM Approved 2 1/2" to 16"
Download Specifications. 2" to 12"  | 14" to 16"
Download brochure.

Mobirise

Sure Seal Foot Valves

Design of the Sure Seal Foot Valve evolved through the need for a reliable valve that could provide positive seating action at both low and high quality pressures without slamming. The Val-Matic® Sure Seal Foot Valve satisfies these requirements plus offers low headloss through the full-ported area and heavy-duty stainless steel basket screening.

Product Overview

Available in sizes 2" - 42"
Unique seating design provides positive shut-off at all pressure ranges without additional loading on the seal
Silent Operation - Short linear stroke
Use in priming of split case pumps
Manufactured under a certified ISO 9001 quality system

Features

Heavy duty stainless steel screening - flow area 3 to 4 times that of the pipe area
Synthetic seating ring - provides a drop-tight seal
Full ported area - equal to pipe size at all points through the valve
Optional fusion bonded epoxy

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Download Specifications. 1900 Sure Seal Foot Valve
Download brochure.

Mobirise

Silent Check Valves

The Silent Check Valve is the preferred choice in applications where silent operation and cost are of major concern. Its short linear stroke and spring return action combine to close the valve prior to flow reversal which effectively eliminates the shock and water hammer normally associated with the sudden stoppage of a reverse flow.

Product Overview

Threaded Style available in sizes 1/2"-2"
Wafer Style available in sizes 2"-10"
Globe Style available in sizes 2 1/2 ”- 42”
Ideal for clean water service - contact factory for other service
Manufactured under a certified ISO 9001 quality system

Features

Silent Operation - fast closure to prevent check valve slam water hammer
Precision metal-to-metal seating
Expanded Body - provides full flow area
Double guided disc - prevents vibrations and wear
Resilient Seat - available for zero leakage
Heavy Duty Spring is tested for over 100,000 cycles
Able to be installed in all flow directions

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
FM Approved Wafer Style - 2" to 10"
FM Approved Globe Style - 2 1/2" to 12"
Meets MSS-SP 125
Download Specifications. 1400A/1800 Silent Check Valve
Download brochure. 

Mobirise

Surgebuster® Check Valves

The Surgebuster® Check Valve is excellent in a number of applications including high head, multiple pump and surge tank installations. The Surgebuster® achieves rapid closure through a short disc stroke of 35° and use of the adjustable Disc Accelerator™ to avoid slamming by flow reversal, while at the same time allowing the disc to be stabilized under flow conditions.

Product Overview

Available in sizes 2" - 48"
Ductile Iron Construction for 250 PSI service
100% Flow area
Energy efficient
Fusion Bonded Epoxy - interior and exterior
Guaranteed Non-Slam Closure
Domed Access Cover
Manufactured under a certified ISO 9001 quality system

Features

Tested for One Million Cycles per AWWA C508 - valve with disc accelerator
Dynamically Tested
SCADA Compatible Limit Switch Assembly
Non-Slam Closing Action - short 35° stroke
Disc Accelerator - closes the valve disc rapidly without producing a slam
Field Adjustable Closure - disc accelerator
Reinforced Disc - memory flex disc with 25 year warranty
Mechanical Indicator
Backflow Actuator - field installable
Stainless Steel Construction available with viton disc
Disc Materials
Welded Nickel Seat available
Glass Lining available
Rubber Lining available for abrasive and corrosive service

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
AWWA C508 Certified
Download Specifications. 7200 Surgebuster® Check Valve
Download brochure. 

Mobirise

Swing Check Valves

The Val-Matic AWWA Swing Check Valve with its rugged construction and full flow area is the most specified check valve for municipal/industrial water and wastewater applications. Its smooth, unrestricted flow design can provide significant savings in pumping costs over other check valves with reduced ports. Its ductile iron 250 psi rating and fusion bonded epoxy coating place the Val-Matic Swing Check Valve in a class above other swing check valves. The available closure options of Lever & Weight, Air Cushion, and Lever & Spring allow the valve to be used effectively in a wide range of pumping system applications.

Product Overview

Available in sizes 2" - 48"
Ductile Iron Construction for 250 PSI service
100% Flow area
Energy efficient
Fusion Bonded Epoxy - interior and exterior
Full Domed Access Cover with Vent Port
Side or Bottom Mounted Oil Cushions available
Closure Options: Lever & Weight, Air Cushion, Lever & Spring
Manufactured under a certified ISO 9001 quality system

Features

Resilient Seating System
Metal Seating System
Disc Pivot Action
V-Packing Shaft Seal System - POP™ (Packing Overload Protection) Shims
O-ring Cartridge Shaft Seal System
Integral Mounting Pads- Standard on 3" and larger
SCADA Compatible Limit Switch Available

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C508
Download Specifications. 7800 Swing Check Valve7900 Swing Check Valve - Oil Cushion
Download brochure. 

Mobirise

Swing-Flex® Check Valve

The Swing-Flex® Check Valve is the valve of choice based on its simple maintenance-free design, low headloss and non-slam characteristics. The valve's smooth, unrestricted full flow design makes it an excellent choice for slurries and sludge, even in vertical flow up applications.

Product Overview

Available in sizes 2" - 48"
Ductile Iron Construction for 250 PSI service
100% Flow area
Energy efficient
Fusion Bonded Epoxy - interior and exterior
Domed Access Cover
One moving part for long valve life
25 Year Disc Warranty
Manufactured under a certified ISO 9001 quality system

Features

Tested for One Million Cycles per AWWA C508
SCADA Compatible Limit Switch Assembly
Non-Slam Closing Action - short 35° stroke
Reinforced Disc - memory flex disc with 25 year warranty
Mechanical Indicator
Backflow Actuator - field installable
Stainless Steel Construction available with viton disc
Viton, Natural Rubber, Hypalon EPDM Disc Materials available
Welded Nickel Seat available
Bottom Mounted Oil Dashpot available
Glass Lining available
Rubber Lining available for abrasive and corrosive service

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
AWWA C508 Certified
Download Specifications. 500A Swing-Flex® Check Valve
Download brochure.  

Mobirise

Tilted Disc® Check Valves

The Tilted Disc® Check Valve is an excellent choice for raw water, cooling water and treated water/wastewater applications. Its streamlined body contouring, flow area 40% greater than nominal pipe size and hydrodynamic disc combine to provide the lowest headloss of any check valve produced today.

Product Overview

Lowest head loss check valve available chart
Energy efficient - cost savings table
Available in Sizes 3" - 60"
ANSI Classes 125, 150 and 250
High Performance Capabilities
Interior epoxy coating standard
Independently certified flow and cycle tests
Flow area equal to 140% of nominal pipe size
Manufactured under a certified ISO 9001 quality system

Features

40° Short Disc Stroke - provides quick closing and reduces water hammer
Lift & Tilt Seat Action - prevents wear
Hydrofoil disc design provides disc stabilization
Disc Position Indicator - for indication and SCADA compatible switches indicated open and closed
Inspection Ports - allow upstream/downstream seat access, mounting ports for dashpots
Bottom Mounted Oil Dashpot - prevents slamming
Top Mounted Oil Dashpot - prevents slam and surges
Quick disconnect coupling for ease of dashpot removal
Drop tight seating - meets AWWA C508
Lift & Tilt Disc Action, Disc Stabilization and Material Selection - combine to provide long valve life
Dual by-pass - for backwashing screens and draining

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C508 requirements
Download Specifications. 9800 Tilted Disc® Check Valve 
Download brochure. Tilted Disc® FlyerTilted Disc® 9000

Mobirise

Ener•G® Ball Valves

The Ener•G® AWWA Resilient Seated Ball Valve is the preferred selection for surge control and energy savings. Val-Matic's Ener•G® Ball Valve when fully open provides 100% flow area equal to the pipe size and will represent a significant savings in pumping costs compared to other pump control valves.

Product Overview

Available in size 4" - 60"
Available in AWWA classes 150lb. and 300lb.
100x more efficient than automatic control valves
Superior flow characteristics for controlling flow and pressure
100% Flow Area - equal to the pipe size
Best selection for surge control
Available with Cylinder, Motor or Manual Actuation
Proof of design and independently flow tested
Manufactured under a certified ISO 9001 quality system

Features

Standard NSF/ANSI 61 Fusion Bonded Epoxy - interior and exterior
Bi-directional resilient Tri-Loc™ seating system - low friction, wear resistant seat that allows easy field adjustment/replacement of the seat without removing valve from the line
Grit Guard™ Seals - prevents bearing wear and shaft seizing
Taper Pins - design locks ball to the shaft

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C507 requirements
Download Specifications. 4000 Ener•G® Ball Valve | Traveling Nut Actuator 
Download brochure.

Mobirise

American-BFV® Butterfly Valves

The Val-Matic American-BFV® Butterfly Valve is the valve of choice for shut-off service in water systems. The American-BFV® line is designed to provide long life, low headloss and trouble-free performance.

Product Overview

Flanged connections sizes 3”-144”
Mechanical joint end connections in sizes 4”- 48”
Wafer design 4" - 12"
150B and 250B AWWA classes
Seat on disc design allows for field adjustment/replacement without the need for special tools or epoxies
Flange x MJ available
Suitable for Water/Wastewater, Power, Process Industries - Air and Liquid Applications
Shut-Off Service, Modulating Service, SCADA Systems, Buried/Plant Service, Pump Control, Flow Control, Isolation
Manufactured under a certified ISO 9001 quality system

Features

Body - Cast Iron/Ductile Iron Construction with ANSI Flanges, Mechanical Joint Ends or ANSI/ISO Wafer
Body Seat - 360o Uninterrupted Ring of T316 stainless steel
Disc - Ductile Iron to withstand impacts from flow and pressure transients
Resilient Seat - Tri-Loc™ Design proven over 30 years. Tri-Loc™ seat on disc, easy field adjustable/replaceable in all sizes
Shaft - AWWA C504 Diameters. Through-Shaft for 3”-24” sizes. Available in larger sizes.
Tangential Taper Pins - design for greatest strength and rigidity
Shaft Seal - V-Type packing for self-adjusting and wear compensating
Sleeve Bearings - Self-Lubricated Nylatron/Teflon for low friction and long life
Thrust Bearing - Bronze bearings to precisely center the disc

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF/ANSI 61 Certified for Drinking Water
Meets AWWA C504 and C516
Download Specifications. 2000 Butterfly Valve | Traveling Nut Actuator
Download brochure. AWWA Butterfly BrochureHigh Performance BrochureZinc-Rich Coating System

Mobirise

Control Panels

Electric Control Panels provide the interface between the hydraulic control panel and the pump motor controls for remote monitoring of valve operation and alarm conditions. The Hydraulic Control Panel allows field adjustment of the valve operating times so that the valve can be set to match the surge characteristics of the piping system. Val-Matic's Hand Control Valve is a 6-ported manual directional valve used to provide manual override functions in conjunction with a 4-Way Solenoid Valve.

Product Overview

Provides reliable control of pneumatic or hydraulic actuated ball, butterfly and plug valves
Val-Matic control panels use the highest quality components for extended dependability
Provides field adjustable operating time in excess of critical surge period
Designed for operation with Val-Matic externally adjustable LS cylinder actuators
Manufactured under a certified ISO 9001 quality system

Features

Control equipment is mounted and piped in corrosion resistant NEMA 4X enclosures with window for long and reliable life in the harshest environments
Supply pressures from 40-150 PSI
Electrical panels provide for remote monitoring of valve and pump operation and alarm conditions
PLC panels available for additional control features or monitoring multiple functions and times
NEMA 4X limit switch with beacon indicator
Standard - shut off valve and system pressure gauge
Compression fitted copper tubing for long life. No hoses to replace.
Junction Box with terminals for customer connections
Optional Hand Control Valve Model 9430 available for operation without electrical power
Designed for use with air, oil and water accumulator systems
Download Specifications. Pump Control System | Air/Oil Pump Control System
Download brochure. 

Mobirise

Oil Accumulators

Val-Matic's Oil Accumulator Systems consist of redundant oil pumps and air compressors piped to an ASME certified air-over-oil accumulator tank to provide a clean and reliable oil supply to operate all of the pump control valves even after power outages.

Product Overview

Accumulator Tank Size Range: 80-400 gallon capacity
Oil Supply Pressure Range: up to 125 PSI
Provides a reliable and corrosion-resistant oil power supply for pump control valves, even after electrical power failure
Fully automatic oil power system with pumps, compressors, controls and accumulator tank
Compact skid design with isolation valves
Manufactured under a certified ISO 9001 quality system

Features

Pressure tank meets ASME Code for Unfired Pressure Vessels
Dual Oil Pump and Air Compressors with lead-lag control
Motors are of TEFC construction for 3 phase, 230 VAC 60 Hz power
Oil Accumulator system is designed for petroleum-based hydraulic oil
Hydraulic component piping is steel pipe or tubing
Pneumatic component piping is steel pipe or tubing
NEMA 12 electric panel includes all motor starters and control circuitry
Control Panel displays system pressure, motor operation and alarms
The complete system is painted with a rust primer and industrial enamel
Download Specifications.

Mobirise

QuadroSphere® Trunnion Mounted Ball Valves

The QuadroSphere® Ball is not a typical ball design. Surfaces of the ball that are non-essential to sealing have been recessed creating additional flow paths. The recessed surfaces provide lipped edges that wipe the seat surfaces clean during opening and closing to avoid particulate buildup. The ball has two sets of seating surfaces to provide shut off in the fully closed position and protect the seats in the fully open position.

Product Overview

Available in sizes 2 NPS - 24 NPS
Available in ASME Classes 150 - 2500
Standard Design ASME B16.34/API 6D
Superior flow with unique contoured ball design
Full port
Available with Pneumatic, Electric, Gear or Lever Actuation
Various seat materials available
Numerous body and trim materials available
Single piston effect seating (DBB) standard, double piston effect seating (DIB) available
Industries: Oil & Gas, Marine, Refining, Geothermal, Power, Chemical, Pulp & Paper, Cryogenic, Mining/Steel
Manufactured under a certified ISO 9001 quality system

Features

QuadroSphere® Ball - unique contoured ball adds 4 additional flow paths
Wear Resistance - reduced ball to seat contact creating up to 70% less wear
Low Running Torque - Reduced engagement and friction
Self-Cleaning Seats - Four recessed surfaces on the ball provide lipped edges for scraping the seats clean
Multiple Flow Paths
Protected Seating - seat surfaces are out of the flow path
Hardened Ball - ground and polished hard chrome plated stainless steel ball
Stem Seals - Double O-ring and Flexible Graphite Packing
Injection Fittings - In the event of damage to the seat insert or stem seals, sealant can be injected to temporarily seal the valve until repairs can be made

Certifications

Meets Standards: API, ASME/ANSI, BS, ISO, MSS and NACE
API 6D Monogram
Certified to API 607, Fire Test Standard
Download Specifications. 
Download brochure. 

Mobirise

Traveling Nut Actuator

Traveling Nut Manual Actuators provide characterized closure which allows the valve to slowly close during the last half of travel to reduce pipeline surges. They are designed to specifically match the torque characteristics of Val-Matic Ener•G® Ball Valves and Val-Matic American-BFV® Butterfly Valves.

Product Overview

Quarter turn manual actuators per AWWA C504 and C507 requirements for plant, buried and submerged service
Lab Tested - 10,000 cycles per AWWA Standards
Available in 8 sizes to handle valve torques up to 180,000 ft-lbs
Manufactured under a certified ISO 9001 quality system

Features

Available with Exclusive externally adjustable stops
End of travel stops rated to 450 ft-lbs
Characterized closure to increase surge protection
O-ring sealed housing to prevent leakage
External indication of valve position
Stainless steel external stop bolts
Integral non-metallic bearing - to eliminate valve shaft side loading
Centralizing ACME thread for high efficiency
Anti-friction bearings used on all input shafts
Levers - Ductile iron for superior strength
Self-locking mechanisim to maintain valve position
Mounting holes for field mounting and multiple 90° orientations, utilizing multiple keyways for precise positioning
Easily adapts to Handwheel, Chainwheel or 2" Nut operation
Spur gears available on larger sizes for ease of operation
Motor mounting option - FA10 flange & keyway provided 
Download Specifications. LSA Traveling Nut Actuator | LSA Traveling Nut Actuator

Mobirise

Worm Gear Actuator

Val-Matic's worm gear actuators provide precise quarter turn actuation in accordance with AWWA Standards. They are standard on Plug Valves and available on Ball and Butterfly Valves.

Product Overview

Quarter turn manual Actuators per AWWA Standards C504, C507 and C517 requirements
Available for above ground, buried service and submerged applications
Available in valve output torques up to 180,000 ft-lbs
Manufactured under a certified ISO 9001 quality system

Features

Totally enclosed and sealed
Externally adjustable mechanical stops rated to 300 ft-lbs
Self-locking mechanisim to maintain valve position
Position indicator clearly indicates valve position for above ground service
Sealed and grease packed for buried or submerged service
Corrosion resistant input shaft for buried and submerged service
Easily adapts to Handwheel, Chainwheel or 2" Nut operation
Spur gear available for ease of operation
Mounting holes for field mounting and multiple 90° orientations, utilizing multiple keyways for precise positioning
Exclusive bearing package for smooth operation and extended life includes bronze radial bearings and roller thrust bearings 
Download Specifications. LS Worm Gear Actuator

Mobirise

Cylinder Actuation

Val-Matic's Traveling Nut Cylinder Actuators provide reliable characterized closure and feature externally adjustable closed stops to control end of valve travel and for ease of adjustment.

Product Overview

Bore sizes up to 24"
Valve torques up to 180,000 ft-lbs
Built to AWWA C541 requirement for hydraulic actuators
Built to AWWA C504 and C507 requirements for ball and butterfly valves
Suitable for air, oil and water supply media up to 150 psig
Available in all stainless steel and non-metallic construction
Versatile design for quarter turn valve application
Designed for high service life in severe applications
Cylinder actuators can also be used with control systems
Manufactured under a certified ISO 9001 quality system

Features

Exclusive externally adjustable closed stops for ease of adjustment
Characterized closure to increase surge protection
Controlled closure during power failure
Positioners available for modulating service
Corrosion resistant barrel, piston and end caps
Chrome-plated stainless steel piston rod provides strength and corrosion resistance
Piston is fitted with a wear ring for long and reliable seal life
Piston seals are self adjusting and wear compensating for extended life
Non-metallic rod gland with inside and outside wipers ideal for high cycle applications
SCADA compatible utilizing Limit Switches, Solenoid Valves and Positioners
Handwheel Overrides to operate valve after loss of supply media
Hand Control Valve Model 9430 available for manual valve control
Provides pump control check operation for quarter turn valves
Download Specifications. LS Cylinder Actuator - Stainless Steel | LS Cylinder Actuator - Non-Metallic

Mobirise

Electric Motor Actuation

Traveling Nut and Worm Gear Actuators are specificlally designed to work with a variety of motor actuators as specified by users and engineers. Motors are built in accordance with industry standards and are available to suit multiple speeds and voltages.

Product Overview

Compliance with AWWA C542 requirement for electric actuators
Electric Power - 3PH, 1PH and DC motors
Designed for ball, plug and butterfly valves
Available to handle torques up to 180,000 ft-lbs
Flexible operating times: 15 to 300 seconds
Characterized closure to increase surge protection when coupled with a traveling nut actuator
Built under a certified ISO 9001 quality system

Features

110/220 Single Phase, 230/460 Three Phase
International voltage requirements available
Modulating Service
Throttling Service
Simple open-close to logic controlled automatic operation
NEMA rated control cabinets
Manual override is standard
Complete integral motor control or customer supplied motor control
Separate motor control available where required
Mechanical position indicator
Remote push button control and indication
Adjustable torque switches, limit switches
De-Clutchable hand wheels
External stops
Optional battery back up system available
Specifications: Contact Factory for information

Mobirise

FloodSafe® Inflow Preventer

The FloodSafe® Inflow Preventer is a revolutionary system that works with air valves and provides unrivaled protection of potable water systems from contamination. By preventing water from passing through the FloodSafe®, contaminated floodwater or water that has been compromised by intentional tampering are prohibited from entering the air valve outlet and are subsequently unable to enter the system.

Product Overview

Available in sizes 1" - 16"
Piped to an outlet for an air valve
Protects potable water systems from environmental and malicious contamination
Field Testing Capability - field test kit
Low Pressure Shut Off
Added Protection - dual float checks
Manufactured under a certified ISO 9001 quality system

Features

Cross Contamination Control
Adaptable to existing air valve installations
Dual Chambers - Upper Chamber is designed as a back up
Dual Float Checks - Designed to assure rapid closure upon the entry of fluid into the chamber.
Resilient Seat - patented resilient seats are specially designed and formulated to assure drop tight closure at low pressures.
Test Ports - Provides for independent testing of both chambers
Basket Screen - prevents debris from entering
Cover - Port sized to allow for full venting capacity of air valve or vent
Optional Field Test Kit - Allows testing of valve in the field

Certifications

NSF/ANSI 372 Certified Lead-Free
NSF 61 Approved Fusion Bonded Epoxy
Meets AWWA C514-15
Meets ASSE 1063
Specifications: 1300 FloodSafe® Inflow Preventor
Download Brochure.

Mobirise

FrostSafe® Two-Way Air Damper

The FrostSafe®, a wafer style bi-directional hingeless damper, is installed in a vent pipe to minimize the thermal exchange of cold and warm air in and out of a vault to help prevent freezing.

Product Overview

Available in sizes 4" - 12"
Wafer style bidirectional hingeless damper
Installed in vent piping
Protects air valve freezing
Minimizes the flow of cold air into vaults through vent pipes
Provides 100% flow area
100% corrosion resistant construction
Allows Air Valves to function at full rated capacity
Wafer design minimizes space requirements
Manufactured under a certified ISO 9001 quality system

Features

Body - High Density Polyethylene
Membrane - Nylon Reinforced Neoprene
Damper Seal - PETG (Polyethylene Terephthatate Glycol)
Adaptable to existing vent pipes

Certifications

NSF/ANSI 372 Certified Lead-Free
Specifications: 1500 FrostSafe® Two-Way Damper
Download Brochure.

Mobirise

VentSafe® Security Cage

The VentSafe® Vent Pipe Security Cage is installed in air valve vent pipes and enclosed reservoirs to prevent the entrance of animals or foreign objects and to provide a barrier against the malicious introduction of liquids and other matter into the vent pipe.

Product Overview

Available in sizes 4"-12"
Installed in vault or reservoir vent pipes
Helps prevent bugs, birds and small animals from nesting in vent pipes
Helps prevent malicious introduction of liquids and other matter
Provides 100% flow area
100% corrosion resistant construction
Wafer design minimizes space requirements
Manufactured under a certified ISO 9001 quality system

Features

Body - PVC
Screen - Mesh, 304 Stainless Steel
Cage - Mesh, 304 Stainless Steel
Flow area equal to 100% of pipe area
Adapts to existing vent pipes

Certifications

NSF/ANSI 372 Certified Lead-Free
Specifications: 1600 VentSafe® Security Cage
Download Brochure.

Address

322/84 ถนนอโศก-ดินแดง
เขตดินแดง กรุงเทพฯ 10400

Contacts

อีเมล์: smithtech@anet.net.th 
โทรศัพท์: 02 248 3713 (-15)  
โทรสาร: 02 248 3716 (-17) 
Line ID: smithw2